Skip to content

symPACK/symPACK

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Configuring and building symPACK


symPACK is a sparse symmetric matrix direct linear solver, with optional support for CUDA devices. It can be built using the following procedure.

First, download symPACK as follows:

git clone git@github.com:symPACK/symPACK.git  /path/to/sympack

External dependencies


UPC++

SymPACK requires the UPC++ v1.0 library to be installed. The minimum supported version of UPC++ is 2019.9.0. If you wish the use the GPU mode of symPACK, UPC++ must be configured for CUDA support and the minimum supported version of UPC+ is 2022.3.0. UPC++ can be downloaded at upcxx.lbl.gov.

UPC++ provides a CMake config file which symPACK uses to link to the UPC++ library. The UPC++ compiler wrappers need to either be in your $PATH, or the UPC++ install path can be provided to CMake as follows:

-DCMAKE_PREFIX_PATH=/path/to/upcxx

Ordering libraries

Several environment variables can be optionally set before configuring the build:

  • metis_PREFIX = Installation directory for MeTiS

  • parmetis_PREFIX = Installation directory for ParMETIS

  • scotch_PREFIX = Installation directory for SCOTCH

  • ptscotch_PREFIX = Installation directory for PT-SCOTCH

Then, create a build directory, enter that directory and type:

cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/path/to/install/sympack -DCMAKE_PREFIX_PATH=/path/to/upcxx
 ...OPTIONS... /path/to/sympack

The ...OPTIONS... can be one of the following:

  • -DENABLE_METIS=ON|OFF to make MeTiS ordering available in symPACK (metis_PREFIX must be set in the environment)

  • -DENABLE_PARMETIS=ON|OFF to make ParMETIS ordering available in symPACK (parmetis_PREFIX must be set in the environment, metis_PREFIX is required as well)

  • -DENABLE_SCOTCH=ON|OFF to make SCOTCH ordering available in symPACK (scotch_PREFIX must be set in the environment)

  • -DENABLE_PTSCOTCH=ON|OFF to make PT-SCOTCH ordering available in symPACK (ptscotch_PREFIX must be set in the environment, scotch_PREFIX is required as well)

CUDA Libraries

To enable the GPU mode of symPACK for CUDA devices, use the -DENABLE_CUDA=ON|OFF build option. Note that this build option is deactivated by default.

symPACK's GPU mode requires CUDA version 6.0 or later. It also requires the cuBLAS and cuSolver libraries, both of which can be found in CUDA Toolkit 8.0 or later.

Notes for specific platforms

Some platforms have preconfigured toolchain files which can be used by adding the following option to the cmake command:

-DCMAKE_TOOLCHAIN_FILE=/path/to/sympack/toolchains/mysystem.cmake
(mysystem.cmake should be replaced with the name of the toolchain file)

A sample toolchain file can be found in /path/to/sympack/toolchains/build_config.cmake and customized for the target platform.

Building symPACK


The cmake command will configure the build process, which can now start by typing:

make
make install

Additionally, a standalone driver for symPACK can be built by typing make run_sympack2D.

Build options

SymPACK has several optional features. We have already mentioned the options related to sparse matrix ordering. The following list is the complete set of options available when building symPACK:

  • -DENABLE_METIS to enable MeTiS ordering (ON|OFF)

  • -DENABLE_PARMETIS to enable ParMETIS ordering (ON|OFF)

  • -DENABLE_SCOTCH to enable SCOTCH ordering (ON|OFF)

  • -DENABLE_PTSCOTCH to enable PT-SCOTCH ordering (ON|OFF)

  • -DAMD_IDX_64 to use 64 bit integers for AMD ordering (ON|OFF)

  • -DMMD_IDX_64 to use 64 bit integers for MMD ordering (ON|OFF)

  • -DRCM_IDX_64 to use 64 bit integers for RCM ordering (ON|OFF)

  • -DENABLE_MKL to enable Intel MKL through the -mkl flag (ON|OFF)

  • -DENABLE_THREADS to enable multithreading (ON|OFF). UPCXX_THREADMODE=par is required during cmake configuration. SymPACK implements its own multithreading and as such should be linked with sequential BLAS/LAPACK libraries.

  • -DENABLE_CUDA to enable CUDA mode. This allows certain sufficiently large computations to be offloaded to CUDA devices (ON|OFF)

Running symPACK


SymPACK uses both UPC++ and MPI, therefore, some preliminary environment variables may need to be defined on most platforms. More details can be found in the UPC++ documentation:

export UPCXX_NETWORK=udp #good option on most workstations, but NOT on high performance networks 
export GASNET_SPAWNFN='C'
export GASNET_CSPAWN_CMD='mpirun -np %N %C'

SymPACK offers a standalone driver that can be used to run and benchmark symPACK's performance on a single sparse matrix. This driver is located in driver/run_sympack2D.cpp. Note that the run_sympack.cpp driver uses a less efficient factorization algorithm than the one used by run_sympack2D.cpp, so it is recommended to almost always use run_sympack2D.cpp.

To run the standalone symPACK driver, for instance on a sample problem from the Suite Sparse matrix collection, the procedure below can be followed:

#first download the input matrix (we are using nasa2146 here)
wget https://sparse.tamu.edu/RB/Nasa/nasa2146.tar.gz
#extract the matrix
tar xzf nasa2146.tar.gz

#run sympack
upcxx-run -n 4 -- ./run_sympack2D -in nasa2146/nasa2146.rb -ordering MMD -nrhs 1

For larger problems, like audikw_1, it is strongly advised to use more efficient orderings (such as METIS). The default ordering is MMD. To use another ordering, include the command line argument -ordering <ORDERING_LIBRARY>. Note that to run symPACK, upcxx-run is used in the example above, but on some platforms, such as NERSC Perlmutter, other launchers may be used to both spawn MPI and UPC++, such as srun if the system is using SLURM. Moreover, for larger problems, the -shared-heap XX argument to upcxx-run may be needed (Please refer to UPC++ documentation).

GPU Mode Options


SymPACK provides several optional command line options that allow the user to configure certain aspects of the GPU mode. They are summarized here:

  • -gpu_v activates verbose mode, which will cause a call to symPACK_cuda_setup() to print the values of certain tuning parameters related to the GPU mode.
  • -gpu_mem <SIZE> controls the amount of memory allocated on the GPU upon calling the symPACK_cuda_setup() method. One can optionally supply a "M" or "G" unit suffix (e.g. -gpu\_mem 2.5GB). If no suffix is included, the allocation size will be interpreted in terms of bytes.
    If this option is not specified, symPACK will attempt to partition a device's memory equally among eachprocess bound to the device. For job configurations that have more than one GPU bound to each node, this default behavior may under-estimate the amount of memory that can be allocated on each device. Therefore, for these sorts of job configurations, it is strongly recommended to use this command line option.
  • -gpu_blk <SIZE> controls the size threshold (in bytes) that a factorized diagonal block must exceed for it to be automatically copied to the GPU bound to a remote process when being sent to said remote process. This allows for an intermediate copy to host memory to be bypassed, which can reduce communication overhead for certain problems.
  • {trsm, gemm, potrf, syrk}_limit <SIZE> controls how many nonzero entries a block must have for the given matrix operation (TRSM, GEMM, POTRF, or SYRK) involving said block to be offloaded to the GPU. The GPU will generally be most beneficial for operations involving large blocks with many nonzeros, but the exact size thresholds for when each operation starts to run faster on the GPU will differ between devices.
  • -gpu_solve determines if the GPU will be used for symPACK's triangular solve routine. Defaults to off (use the CPU for the triangular solve).
  • -fallback {cpu, terminate} determines what symPACK will do in the event that an attempt to allocate memory on a device for use in a matrix computation fails due to an insufficient amount of free memory. Setting this option to cpu will make it so symPACK will simply perform the computation on the CPU instead of the GPU. Setting this option to terminate will cause symPACK to throw an error and cease execution when a device allocation fails. Defaults to terminate

Publications


Recent publications

Older publications (based on UPC++ v0.1 version of symPACK)